.

Tuesday, January 7, 2014

Manufacture Of Sulfuric Acid

------------------------------------------------- Manufacture of processic Acid: The contact Process randomnessic erosive is do using the Contact process. entropyic window pane is construct via entropy dioxide. The raw materials be sulphur, air (oxygen) and water. on that point are three stages in the process. The main stages in the fiction of sulfuric acid Stage 1: S(s) + O2 (g) ? SO2 (g)  Sulphur dioxide is made by fire sulphur in air or oxygen in a combustion chamber. Sometimes straighten out disulphide is burned in air instead. The sulphur dioxide is purified to remove impurities that would harm the throttle at later stages. Stage 2: Sulphur dioxide + Oxygen  Sulphur trioxide 2SO2 (g) + O2 (g)  2SO3 (g) The sulphur dioxide is then converted to sulphur trioxide. This step is called the Contact process. Sulphur dioxide is mixed with oxygen and passed over a g as pedal (Vanadium(V) oxide: V2O5)) at 450°C at 1-2 atm. These are the optimum temperatures and pressures for the chemical reception and about 99% of the sulphur dioxide is converted into sulphur trioxide chthonian these conditions. This is a reversible reaction. The advance(prenominal) reaction is exothermic. Increasing the temperature decreases the yield.
Ordercustompaper.com is a professional essay writing service at which you can buy essays on any topics and disciplines! All custom essays are written by professional writers!
However, at very low temperatures, the graze of reaction is very dimmed and the time required would repair the process costly. A catalyst and temperature of 450°C are utilise to speed up the reaction while still achieving a reasonable yield. An annex in pressure would also increase the yield a! nd the rate, but the be of this would be high. The catalyst speeds up the rate of both the forward reaction and the backward reaction. The catalyst causes the reaction mixture to sift its equilibrium composition more than quickly. This stage takes place in the converter (c.f. catalytic converters in cars). Stage 3: SO3 (g) + water supply (l) ? H2SO4 (l) Finally the sulphur trioxide is converted to sulphuric acid. Overall, this process dejection be...If you want to engage a full essay, order it on our website: OrderCustomPaper.com

If you want to get a full essay, visit our page: write my paper

No comments:

Post a Comment